On this page
In short
Film the setting, the approach and entrance, each main space, the details that set the place apart, the outside spaces and the views. Use one slow, steady move per shot, start and end each on a still frame, hold it for ten seconds or more, and prepare the rooms and the light before you start.
A tour film is only as good as the shots you bring back. Unlike a wedding, a venue waits for you, so you can plan every shot and film it again if it isn’t right. This article sets out a shot list for a venue, hotel or property tour, how to film each move, and what to prepare before the day. It’s part of our guide to venue and property tour films.
What should you prepare before filming a venue?
Most of the work happens before you press record.
- Ask what the place wants to show. The venue’s best room, the view it’s known for, the feature buyers ask about. A list from the owner saves guessing.
- Visit, or ask for photos. Know the route through the building before the day.
- Choose the time of day. Each space has its best light, depending on which way it faces. Plan the route around it, and film interiors when the sun isn’t shining straight in.
- Clear and dress the rooms. Hide cables, bins, signs and clutter, straighten furniture, open curtains, and turn on the lights that make a room feel warm.
- Agree on people. Decide whether guests, staff or residents will be in shot. If anyone is identifiable, get their agreement, and check what the venue needs from you on that.
- Keep one shoot in one folder. Stray clips are easy to carry over. Among the Jackson Ridge clips, the AI found one that “is a Vienna walking-tour vlog that has nothing to do with this property”.
What shots does a venue tour need?
Work through the place in roughly the order the film will show it. The order of rooms in a venue tour film explains that route. A practical shot list:
- The setting. A wide establishing shot of the building and what surrounds it: the sea, the hills, the street. Film more than one, from different heights if you can.
- The approach and entrance. A slow move towards the door, through the gate, up the steps. In the Dolmen Resort Hotel film, the AI chose a “Push-in to the glass entrance, leading us inside” to start the arrival.
- Each main space. One wide shot that shows the whole room, then one or two moves that show how it is used. The Dolmen lobby chapter opens on a “Glide through the marble lobby to the lounge”.
- Feature details. The thing people remember: a staircase, a fireplace, a ceiling, a view framed by a window. In Jackson Ridge, the living spaces chapter starts on a “Striking floating wooden staircase”.
- Smaller details. Textures, tableware, flowers, light fittings, a handle on an old door. These are the cutaways that join the bigger shots.
- Outside spaces. Terraces, gardens, pools, courtyards. A move that reveals the space works well here, such as the Dolmen’s “Rising reveal of sparkling pool and resort”.
- The view. The view from the terrace or the best window, held still for longer than feels necessary. The Dolmen film has a “Long calm hold: sea framed by parasols”.
- A closing wide. A last establishing shot, perhaps at a different time of day, to end on.
For a wedding venue, add the spaces of the day: where the ceremony happens, where the meal is served, and where the photographs are usually taken.
How should you film each shot?
A tour film looks calm and expensive when every move is slow and steady.
- One move per shot. A push in, a pull out, a slide, a rise or a slow pan. Don’t combine them.
- Start and end still. Hold a second or two before and after the move, so the editor can cut at either end.
- Hold for ten seconds or more. Short clips leave nothing to choose from.
- Keep pans slow. A fast pan blurs. The AI suggested a Jackson Ridge clip of the courtyard plunge pool, “though the pan is fast and only about a second is sharp”, and it isn’t in the film.
- Use a gimbal or a steady hand. The Villa Bighi shoot names a DJI Osmo Pocket in its files. Any small gimbal helps keep moves smooth through doorways and along corridors.
- Keep verticals straight. Walls and door frames that lean make a room look wrong. Level the camera before you move.
- Film at 50 or 60 fps if you can. The three tours here were shot at 50 or 60 frames per second, apart from one Jackson Ridge clip at 30, which gives you the option of slow motion for the smoothest moves.
Should you take photos on a venue shoot too?
Yes, if you’re a photographer, and they can go into the film. Villa Bighi included 4 photos with its 40 clips, and one of the AI’s suggestions was to “Add the courtyard doorway still photo (DJI_0672) as a slow-zoom shot in the Stone courtyards section”. A strong still can stand in for a space the video didn’t catch well, and the venue gets a set of photographs as well as a film.
Do you need to film vertical for social media?
It helps to plan for it. None of the Dolmen clips was filmed upright, so its vertical teaser was made from landscape footage. That works, but a vertical crop from 1920×1080 keeps only a narrow slice of the frame and is softer once scaled up. Leave room around the subject of key shots, or film a few upright: a staircase, a doorway, a tall window, a figure walking through a room. How long should a venue tour film be? covers the vertical teaser.
Can you write the shot list into the brief?
If you edit with AI, the same priorities you film to can go into the brief. The Villa Bighi brief asked the AI to “Prioritise the strongest, smoothest and best-exposed footage, avoid repetitive angles, and use movement to connect spaces”. That is a good rule for filming too.